The Flying Deuces
Cub Hanger
Rash ... 30 minute fix
(click photos to enlarge)
| Broken Spar (3 breaks) & Torn
Covering. Step 1: Glue the spar back together, then
position it and glue it into correct position. Mate solid pieces to the inside & bottom of original spar for strength.... clamp & let CA dry as you get the covering you need from your roll. |
|||
 |
 |
 |
 |
| Step 2: Cut away damaged
covering to the next hard attachment point & sand the replaced wood smooth. |
Step 3: Cut a piece of new covering and tack it into place. |
||
 |
 |
 |
 |
| Step 4: Pull the
covering to the bottom, tack it with heating iron. Finish trimming
all the edges & set them all into place using a heating iron. Go over it all with a heat gun to smooth out the covering for a nice, matching finish. |
|||
 |
 |
 |
 |
 |
 |
||
|
The total time for this fix was under 30 minutes.
|
|||